WMC is short for Windows Media Center, a player produced by Microsoft. It mainly uses the IPTV standard so it supports DVB TV poorly. MCE only support DVB-T now and doesn’t support DVB-C or DVB-S which are widely used. So some DVB-S card manufacturers developed some special drive which can make DVB-S card be supported like DVB-T in MCE. So that you can enjoy the convenience of MCE with DVB-S card as well. DVBLink is among these drives. It gives out a solution that can make satellite TV program, cable television and IPTV works under MCE platform. DVBLink can transform video steam to invented UPNP client, and makes it an expander which can be absorbed into MCE. DVBLink for Dreambox is one of the DVBLink series. It can imitate Dreambox to tuner hardware, just like a TV card inside the television. This makes Dreambox can be supported by MCE perfectly. DVBLink for Dreambox can also support the broadcast signal and TV signal which is given out by satellite set-top box. It also supports EPG and the function of video recording. DVBLink for Dreambox can only work in 32-bit or 64-bit Windows Vista and Windows 7 operating system. DVBLink for Dreambox supports DM500 series, DM5600 series, DM600, DM7000 series, DM7025, DM800 and DM8000 now. It also supports the PLi, Nabilosat and Gemini firmware. The newest edition of DVBLink for Dreambox is 2.1 edition and before you buy it, you have a trial time of 20 days. It is also the only software which can makes your computer. Now, let’s start to set up the parameter. 1. Download DVBLink for Dreambox and decompress it. 2. Install DVBLink Server first or DVBLink for Dreambox cannot be installed. When the install process finishes, click on Yes to restart your system for the configuration changes made to DVBLink Server to take effect. 3. After the restart of the computer, turn on the task launcher and check whether the process of DVBLink Server is there, make sure it is working. 4. Install DVBLink for Dreambox. After the install process, click on the Dreambox (steam) option and then click on the right arrow. Revise the IP address of Dreambox. 5. Click on the Check Dreambox Connection, and you will find the number of channels on Dreambox appeared on your screen. 6. Click on Server Configuration and set the channel information. 7. Set the TV signal options on WMC which is similar of TV card. Now all the set work is done, and you can run DVBLink for Dreambox from WMC now. If there is no mistake in your settings, congratulations, you can now use WMC to watch Dreambox programs.
Do you know about dreambox 500? And are you interested in wholesale dm 500t? More information about dreambox 500 here.